ZlideOn Zipper
When you zipper is broken or brusted, would you trash or would you repair it?
The latest invention ZlideOn is able to repair zippers in just 3 seconds, without the need to remove the entire system.
Time shows that 80 per cent of all broken zipper does not work anymore because of damaged sliders. The slider gets weak and broken and so on. Until now one had to remove the whole old zipper and to apply a new one, just because of a broken slider. This won´t be the case anymore because of ZlideOn. When you use ZlideOn you just have to change the sliders and the zipper will be in one piece again. ZlideOn can be ordered in 9 different colours and in more than 13 sizes and these are fitting for metal, plastic, spiral and invisible zippers. To put i briefly: For every zipper there is a ZlideOn.
How am I to know which size I need?
Just measure the length and breadth of the zipper and look them then up in the
(Größentabelle) and you´ll see which size you´re about to need.
|
Reißverschluss
|
Marke
|
Breite mm
|
Höhe mm
|
ZlideOn-Typ
|
Metall,
Kunststoff |
Opti D,V, K,
YKK 45i |
4,55-4,90 |
1,90-2,00 |
3A-2 (gerader Zipper) |
| Spiral-RV |
Opti S4 |
3,90-4,12 |
1,42-1,55 |
3C-2 (gerader Zipper) |
| Spiral-RV |
YKK 3C |
4,12-4,24 |
1,85-2,00 |
3CB-2 (gerader Zipper) |
| Spiral-RV |
YKK 45Ci |
4,90-5,10 |
2,10-2,30 |
4C-2 (gerader Zipper) |
Nahtverdeckter
RV |
|
4,90-5,10 |
2,10-2,30 |
4C2-2 (gerader Zipper) |
Metall,
Kunststoff |
Opti 5, 15, F, Q
YKK 5i, 5VSi,
5VSq, 5YG |
5,70-6,10 |
2,40-2,70 |
5A-1 (runder Zipper)
5A-2 (gerader Zipper) |
Metall,
Kunststoff |
Opti |
5,80-6,20 |
2,80-3,00 |
5B-1 (runder Zipper)
5B-2 (gerader Zipper) |
| Spiral-RV |
Opti, Salmi S4
YKK 5Ci, 5CT |
6,33-6,57 |
2,60-2,75 |
5C-1 (runder Zipper)
5C-2 (gerader Zipper) |
Nahtverdeckter
RV |
YKK 5CNu 6 |
6,33-6,50 |
2,60-2,70 |
5C2-1 (runder Zipper)
5C2-2 (gerader Zipper) |
Metall,
Kunststoff |
YKK 8i, 8VS,
8VSi |
7,35-7,60 |
2,90-3,20 |
8A-1 (runder Zipper) |
| Spiral-RV |
YKK, Salmi, Opti |
7,10-7,30 |
2,80-2,90 |
8C-1 (runder Zipper) |
Metall,
Kunststoff |
Opti, YKK 10V,
Salmi 69 |
8,60-9,00 |
3,75-4,00 |
10A-1 (runder Zipper) |
How am I to measure my original, broken zipper?
(Bild)
How am I to remove the old slider?
Simply use cutting pliers.
Cut right in the middle of the old slider´s lever, like shown in the pictures A, B and C.
Does the ZliseOn sytsem still works, if one or more sprockets are missing?
Yes it does. Even up to three missing or broken sprockets.
Sometimes the beginning of the original zipper is missing. What am I supposed to do?
First of all accelerate the old zipper and install ZlideOn.
Press the sprockets together and simply pull ZliseOn down to the bottom.
ZlideOn doesn´t matches my old zipper. What did I wrong?
Maybe you just did not open the ZlideOn wide enough.
Simply open it a little bit more or try another size of ZlideOn.
|
- ©2008 Wolle & Design